it-swarm-ja.com

vmwareはhgfsをインストールしません

これが私がFedora16に持っているインストールログです:

_The VMware Host-Guest Filesystem allows for shared folders between the Host OS 
and the guest OS in a Fusion or Workstation virtual environment.  Do you wish 
to enable this feature? [yes] 

Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-8X1GaP/vmci-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/linux/driver.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/linux/vmciKernelIf.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciDriver.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciResource.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciRoute.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciContext.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciDatagram.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciHashtable.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciEvent.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciQueuePair.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciQPair.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/common/vmciDoorbell.o
  CC [M]  /tmp/modconfig-8X1GaP/vmci-only/driverLog.o
  LD [M]  /tmp/modconfig-8X1GaP/vmci-only/vmci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-8X1GaP/vmci-only/vmci.mod.o
  LD [M]  /tmp/modconfig-8X1GaP/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-8X1GaP/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-8X1GaP/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/modconfig-8X1GaP/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/message.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/rpcout.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/filesystem.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/cpName.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/link.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/request.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/stubs.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsUtil.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/tcp.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsEscape.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/file.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/bdhandler.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/transport.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/inode.o
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c: In function ‘HgfsPermission’:
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c:1755:8: warning: ‘dentry’ may be used uninitialized in this function [-Wuninitialized]
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c:1813:22: note: ‘dentry’ was declared here
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/super.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/vmci.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/dir.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/fsutil.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/cpNameLinux.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsBd.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/backdoorGcc64.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/module.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/page.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/backdoor.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/dentry.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/cpNameLite.o
  CC [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/kernelStubsLinux.o
  LD [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.mod.o
  LD [M]  /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/modconfig-8X1GaP/vmhgfs-only'

Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-SN1mhC/vmxnet-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
  CC [M]  /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.mod.o
  LD [M]  /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-SN1mhC/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-SN1mhC/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/modconfig-SN1mhC/vmxnet-only'

The vmblock enables dragging or copying files between Host and guest in a 
Fusion or Workstation virtual environment.  Do you wish to enable this feature?
[yes] 

!!! [EXPERIMENTAL] !!!
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present.  By selecting yes,
you will be enabling this experimental feature.  You can always disable this
feature by re-running vmware-config-tools.pl.

Would you like to enable VMware automatic kernel modules?
[no] 

Thinprint provides driver-free printing. Do you wish to enable this feature? 
[no] 


Disabling timer-based audio scheduling in pulseaudio.



Detected X server version 1.11.4



Distribution provided drivers for Xorg X server are used.

Skipping X configuration because X drivers are not included.

Creating a new initrd boot image for the kernel.
   Starting Virtual Printing daemon:                                   done
Starting vmware-tools (via systemctl):                     [  OK  ]
The configuration of VMware Tools 9.2.3 build-1031360 for Linux for this 
running kernel completed successfully.
_

「VMwareホスト-ゲストファイルシステムは共有フォルダを許可します[はい]」という質問があることに注意してください。その後、hgfs.koがインストールされ、vmxnet.koのインストールが正常に行われます。

これがFedora18で取得したログです

_The VMware Host-Guest Filesystem allows for shared folders between the Host OS
and the guest OS in a Fusion or Workstation virtual environment.  Do you wish
to enable this feature? [yes]

Before you can compile modules, you need to have the following installed...
make                                                                                                 gcc                                                                                                                                                          
kernel headers of the running kernel                                                                                                                        


Searching for GCC...
Detected GCC binary at "/bin/gcc".
The path "/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers at
"/lib/modules/3.9.4-200.fc18.x86_64/build/include".
The path "/lib/modules/3.9.4-200.fc18.x86_64/build/include" appears to be a
valid path to the 3.9.4-200.fc18.x86_64 kernel headers.
Would you like to change it? [no]
make: Entering directory `/tmp/modconfig-jub19n/vmxnet-only'
/bin/make -C /lib/modules/3.9.4-200.fc18.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.9.4-200.fc18.x86_64'
  CC [M]  /tmp/modconfig-jub19n/vmxnet-only/vmxnet.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-jub19n/vmxnet-only/vmxnet.mod.o
  LD [M]  /tmp/modconfig-jub19n/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.9.4-200.fc18.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-jub19n/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-jub19n/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/modconfig-jub19n/vmxnet-only'

The vmblock enables dragging or copying files between Host and guest in a
Fusion or Workstation virtual environment.  Do you wish to enable this feature?
[yes]
!!! [EXPERIMENTAL] !!!
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present.  By selecting yes,
you will be enabling this experimental feature.  You can always disable this
feature by re-running vmware-config-tools.pl.

Would you like to enable VMware automatic kernel modules?
[no]
Thinprint provides driver-free printing. Do you wish to enable this feature?
[no]

Disabling timer-based audio scheduling in pulseaudio.
Detected X server version 1.13.3
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.

Creating a new initrd boot image for the kernel.
   Starting Virtual Printing daemon:                                   done
Starting vmware-tools (via systemctl):                     [  OK  ]
The configuration of VMware Tools 9.2.3 build-1031360 for Linux for this
running kernel completed successfully.
_

open-vm-tools recipie も試してみました。だが、

_[[email protected] Documents]# mount -t vmhgfs .Host:/ /mnt/hgfs
Error: cannot mount filesystem: No such device
_

Vm-toolsサポートサイトがどこにあるのかわかりません。

更新

確認したところ、vmxnet3はconfigure_module('vmxnet3')によって_vmware-config-tools.pl_にインストールされています。 configure_module('vmhgfs')に到達しないため

_     # vmhgfs now depends on vmci.  Check to ensure it's configured.
     if (defined(db_get_answer_if_exists('VMCI_CONFED')) &&
         db_get_answer('VMCI_CONFED') ne 'yes') {
        return 1;
     }
_

通話を私たちのニーズから静かに「保護」します。 db_get_answer_if_exists('VMCI_CONFED')) = 1, db_get_answer('VMCI_CONFED') = 'no'と警告と言えます

モジュールvmciは、別のインストーラーまたはパッケージによってこのシステムに既にインストールされており、このインストーラーによって変更されることはありません。フラグ--clobber-kernel-modules = vmciを使用してオーバーライドします。

上記のログで。

1
Val

vmware-config-tools.plをvmciオーバーライドフラグで開始します。

vmware-config-tools.pl  --clobber-kernel-modules=vmci

問題はなくなりました。今、私は別のものを手に入れています

/modconfig-o4Yd7O/vmhgfs-only/inode.c: In function ‘HgfsTruncatePages’:
/tmp/modconfig-o4Yd7O/vmhgfs-only/inode.c:888:4: error: implicit declaration of function ‘vmtruncate’

エラー。しかし、それは別の問題であり、私はそれを見ています(それでも、 このパッチ の助けを借りてそれを修正しました)。

0
Val